Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Profitez de récompenses et de remises réservées aux membres
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.

Dell Latitude 5400 Chromebook Service Manual

Installing the display assembly

About this task

NOTE Ensure that the hinges are opened to the maximum before replacing the display assembly on the palmrest and keyboard assembly.

Steps

  1. Align and place the system chassis under the hinges of the display assembly [1].
  2. Replace the four (M2.5x3) screws that secures the display assembly to the system chassis [2].
    Install display assembly
  3. Seat the system chassis on the display assembly.
    Install display assembly 1
  4. Connect the cable to the connector on the system board and adhere the adhesive tape [1].
  5. Reroute the eDP cable and connect it to the eDP connector [2].
  6. Place the eDP cable bracket on the system board [3].
  7. Replace the two (M2x4) screws that secures the eDP cable bracket to the system board [4].
    Install display assembly 2

Next steps

  1. Install the battery.
  2. Install the base cover.
  3. Install the microSD card.
  4. Follow the procedure in After working on your computer.

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\