Latitude 5290 2-in-1 Owner's Manual

Removing the battery

1. Follow the procedure in Before working inside your tablet.
2. Remove the:
   1. uSIM/micro SD card

      NOTE: : uSIM card slot is available only on tablets shipping with WWAN module.

   2. display panel
3. To remove the battery:
   1. Release the adhesive tape that secures the battery connector to the system board.
   2. Disconnect the battery cable from the connector on the system board.

      NOTE: : Ensure to pull the cable by the lever of the battery connector, to avoid damage to the pin.

   3. Remove the M2 x 4 screws (4) that secure the battery to the tablet [1].
   4. Lift the battery from the tablet [2].