- Notes, cautions, and warnings
- Working on your computer
- Removing and installing components
- Technology and components
- System specifications
- Processor specifications
- System specifications
- Memory specifications
- Video specifications
- Audio specifications
- Port and connector specifications
- Communication specifications
- Camera specifications
- Display specifications
- AC adapter specifications
- Battery specifications
- Physical specifications
- Environmental specifications
- System setup
- Entering BIOS without keyboard
- System setup options
- General screen options
- System Configuration screen options
- System Configuration screen options
- Video screen options
- Security screen options
- Secure Boot
- Intel software Guard Extensions
- Performance screen options
- Power Management screen options
- POST Behavior
- Virtualization Support options
- Wireless screen options
- Maintenance
- System logs screen options
- System Log
- Updating the BIOS
- System and setup password
- Software
- Troubleshooting
- Contacting Dell
Latitude 5290 2-in-1 Owner's Manual
POST Behavior
- Option
- Description
- Adapter Warnings
- Allows you to enable or disable the system setup (BIOS)
warning messages when you use certain power adapters.
Enable Adapter Warnings This option is selected by default.
- Keypad (Embedded)
- Allows you to choose one of two methods to enable
the keypad that is embedded in the internal keyboard.
- Fn Key Only This option is enabled by default.
- By Numlock
NOTE: : When setup is running, this option has no effect. Setup works in Fn Key Only mode.
- Numlock Enable
- Allows you to enable the Numlock option when the computer boots.
- Enable Network This option is enabled by default.
- Fn Key Emulation
- Allows you to set the option where the Scroll Lock key is used to simulate the Fn key feature.
- Enable Fn Key Emulation This option is enabled by default.
- Fn Lock Options
- Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1 – F12, between their standard and secondary functions. If you disable this option, you cannot toggle dynamically the primary behavior of these keys. The available options are:
- Fn Lock This option is enabled by default.
- Lock Mode Disable/Standard This option is selected by default.
- Lock Mode Enable/Secondary
- Fastboot
- Allows you to speed up the boot process by bypassing
some of the compatibility steps. The options are:
- Minimal This option is selected by default.
- Thorough
- Auto
- Extended BIOS POST Time
- Allows you to create an additional pre-boot delay.
The options are:
- 0 seconds This option is enabled by default.
- 5 seconds
- 10 seconds
- Full Screen Logo
- Allows you display full screen logo if your image match screen resolution.
The options are:
- Enable Full Screen Logo This option is disabled by default.
- Warnings and Errors
- Allows you to select in the BIOS setup options that cause the boot process to pause only, when warnings or errors are detected rather than stop, prompt and wait for user input. The options are:
Prompt on Warnings and Errors. This option is enabled by default.
Continue on Warnings
Continue on Warnings and Errors
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez indiquer si l’article a été utile ou non.
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\