Configuring iDRAC Direct USB Connection Using the Webserver
To configure the USB port:
In the iDRAC Web interface, go to
Overview > Hardware > USB Management Port. The
Configure USB Management Port page is displayed.
From the
USB Management Port Mode drop-down menu, select any of the following options:
Automatic — USB Port is used by iDRAC or the server’s operating system.
Standard OS Use — USB port is used by the server OS.
iDRAC Direct only — USB port is used by iDRAC.
From the iDRAC management interface: USB XML Configuration drop-down menu, select options to configure a server by importing XML configuration files stored on a USB drive:
Disabled
Enabled only when server has default credential settings
Enabled
For information about the fields, see the
iDRAC Online Help.
Click
Apply to apply the settings.
Les données de cette rubrique ne sont pas disponibles
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez indiquer si l’article a été utile ou non.
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\