AmdSmartShift |
Sets the AmdSmartShift. Possible values: |
BiosConnectActivation |
Configures the state of the available
BiosConnect boot paths. Possible values:
- Deactivate
— BIOS setup options are not available and all BiosConnect boot paths
are disabled.
- FullActivation
— BIOS Setup options are enabled and all BiosConnect boot paths are
enabled.
- LaunchpadActivationOnly
— BIOS setup options are enabled and only launchpad code path is enabled.
|
DashSupport |
Enables and disables the support
for Desktop and Mobile Architecture for System Hardware (DASH) management
through Platform Level Data Model (PLDM) exchanges. Possible values: |
DisGpuExtDisplay |
Enables or disables the platform
external displays. Possible values: NOTE: This feature
is used in hybrid graphics mode only. |
ExpansionBay 1 |
Enables or disables Expansion Bay 1. Possible values: |
ExpansionBay 2 |
Enables or disables Expansion Bay 2. Possible values: |
ExpansionBay 3 |
Enables or disables Expansion Bay 3. Possible values: |
FaultTolerantMemLogClear |
Enables or disables the Fault Tolerant
Memory Log Clear option. Possible values:
- Enabled —
System clears fault tolerant memory log during the next boot.
- Disabled
— Fault Tolerant Memory Log Clear option will be disabled, and no
action will be taken during the next boot.
NOTE: Fault Tolerant
Memory Log Clear option will be reset to disabled state after log
gets cleared. |
GpsWwan |
Enables or disables GPS WWAN Radio. Possible values: |
GraphicSpecMode | Enables or disables the modes. Possible values: NOTE: This feature
is used in hybrid graphics mode only. |
MemPerMonitor |
Enables or disables the memory performance
monitor feature. Possible values: |
PcieBusAllocation |
This feature controls the PCIe bus resources
allocation among the PCIe SLOTs. Possible values:
- Default
- OptimizeforThunderbolt
- Option1
- Option2
- Option3
|
RecoveryTool |
Enables or disables the Dell recovery
tool. Possible values:
- Enabled
— Enables the Dell recovery tool.
- Disabled
— Disables the Dell recovery tool.
|
ReportLogoType |
Reports the type of splash screen
logo (Dell or custom) that is passed from BIOS to user. Possible values: |
RuggedDeskDockNicPxe |
Enables or disables the support
for PXE Boot from Rugged Desk Dock NIC device. Possible values: |
ServiceOSClear |
Deletes the service OS non-volatile
region. Possible values:
- Enabled
— Deletes the service OS non-volatile region and changes the token
status to Disabled.
- Disabled
— Does not delete the service OS non-volatile region.
|
UsbWakeS4En |
Enables or disables the USB wake
from s4 power state of the system. Possible values:
- Enabled
— Enables the USB wake from s4 power state of the system.
- Disabled
— Disables the USB wake from s4 power state of the system.
|