Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Profitez de récompenses et de remises réservées aux membres
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.

Alienware Aurora R8 Service Manual

PDF

Procedure

  • NOTE: Note the routing of all cables as you remove them so that you can reroute them correctly after you replace the system board. For information on system board connectors, see " System-board components".
  1. Disconnect the top panel USB cables from the system board.
  2. Disconnect the optical drive data cable from the system board.
  3. Disconnect the hard drive data cable from the system board.
  4. Disconnect the front panel audio cable from the system board.
  5. Disconnect the LED controller cable from the system board.
  6. Disconnect the graphics-card power cable from the system board.
  7. Disconnect the processor power cable from the system board.
  8. Disconnect the top-chassis fan cable from the system board.
  9. Disconnect the system-board power cable from the system board.
  10. Disconnect the front-chassis fan cable from the system board.Image: Disconnecting the cables from the system board
  11. Remove the eight screws (#6-32 X 1/4") that secure the system-board assembly to the chassis.
  12. Lift the system-board assembly out of the chassis. Image: Removing the system board

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\