Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Profitez de récompenses et de remises réservées aux membres
  • Créez et accédez à une liste de vos produits

Alienware Aurora R8 Service Manual

PDF

Procedure

  1. Remove the two screws (#6-32 X 1/4") that secure the top cover to the chassis.
  2. Disconnect the lighting cable from the top cover. Image: Removing the screws that secure the top cover to the chassis
  3. Slide the lighting cable through the slot on the chassis.
  4. Starting from the rear, release the tabs on the top cover from the slots on the chassis.
  5. Lift the top cover off the chassis from the rear.Image: Removing the top cover
  6. Turn the top cover over, release the tabs on the top cover from the slots on the top bezel. Image: Releasing the tabs on the top cover from the slots on the top bezel
  7. Lift the top cover from the top bezel.Image: Removing the top cover from the top bezel
  8. You are left with top bezel and top cover.Image: Top bezel and top cover

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\