Dell Latitude 5580 Owner's Manual

Installing the display assembly

1. Place the display assembly to align with the screw holders on the computer.
   NOTE Close the LCD before inserting the screws or turning over the laptop.
   CAUTION Route the display cable and the antenna cable through the LCD hinge mount holes as LCD assembly is inserted into the base, to prevent possible cable damage.
2. Tighten the M2x5 screws to secure the display assembly to the computer.
3. Turn over the computer.
4. Connect the antenna cables and display cable to the connectors.
5. Place the display cable bracket over the connector and tighten the M2x5 screws to secure the display cable to the computer.
6. Install the:
   1. hinge cap
   2. WLAN card
   3. battery
   4. base cover
7. Follow the procedure in After working inside your computer.