Removing the LED board
About this task
The figure indicates the location of the LED board and provides a visual representation of the removal procedure.
![Removing the LED board](https://dl.dell.com/content/guides/public/html//latitude_5401_sm/images/GUID-90E555D9-AFEB-4287-B6A1-7B5711A3D949-low.jpg)
Steps
- Locate the LED board on your computer.
- Open the latch and disconnect the LED board cable from the connector on the system board.
- Peel back the LED board cable.
NOTE The LED board cable is secured to the computer by an adhesive strip.
- Remove the single (M2x3) screw that secures the LED board to the computer.
- Lift the LED board out of the computer.
Aucune donnée n’est disponible sur le sujet