Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Voir les commandes et de suivre l'état de votre expédition
  • Profitez membres seulement récompenses et des remises
  • Créez et accédez à une liste de vos produits
  • Gérez vos sites Dell EMC, vos produits et vos personnes-ressources pour les produits dans Administration de l’entreprise.

Latitude 5401 Service Manual

Removing the DC-in

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.
  3. Remove the battery.
  4. Remove the heatsink-discrete.

About this task

The figure indicates the location of the DC-in and provides a visual representation of the removal procedure.

Removing the DC-in

Steps

  1. Locate the DC-in port on your computer.
  2. Remove the two (M2x5) that secure the DC-in metal bracket.
  3. Lift the DC-in metal bracket from the computer.
  4. Disconnect the DC-in cable from the connector on the system board.
  5. Remove the DC-in port from the computer.

  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Avez-vous trouvé cet article utile?
  Les commentaires ne peuvent pas contenir ces caractères spéciaux : <>()\