Installing the smartcard reader board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the smartcard reader board and provides a visual representation of the installation procedure.
![Installing the smartcard reader board](https://dl.dell.com/content/guides/public/html//latitude_5401_sm/images/GUID-145F4F76-C7D4-4267-BA59-FB6DC1FE1FB2-low.jpg)
Steps
- Locate the smartcard reader board slot on your computer.
- Align and place the smartcard reader board into the slot on your computer.
- Replace the three (M2x3) screws that secure the smartcard reader board to the computer.
- Adhere the smartcard reader cable to the palmrest and connect the cable to the connector on the system board.
- Connect the touchpad button board cable to the connector on the system board.
Aucune donnée n’est disponible sur le sujet