Installing the battery
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the battery and provides a visual representation of the installation procedure.
![Installing the battery](https://dl.dell.com/content/guides/public/html//latitude_5401_sm/images/GUID-3740ECCC-C459-47A1-B402-400A6901007F-low.jpg)
Steps
- Place the battery on the palmrest and align the screw holes on the battery with the screw holes on the palmrest.
- Install the single (M2x6) captive screw to secure the battery to the palmrest.
- Connect the battery cable to the connector on the system board.
Aucune donnée n’est disponible sur le sujet