- Notes, cautions, and warnings
- Notes, cautions, and warnings
- Working on your computer
- Technology and components
- Disassembly and reassembly
- Base cover
- Battery
- WLAN card
- WWAN card
- Memory modules
- Solid-state drive
- Coin-cell battery
- Inner frame
- Heatsink assembly-discrete
- Heatsink assembly—UMA
- DC-in port
- SmartCard reader
- Touchpad buttons
- LED board
- Speakers
- System board
- Keyboard
- Power button
- Display assembly
- Display bezel
- Hinge caps
- Display panel
- Camera
- Display hinges
- Display (eDP) cable
- Display back cover assembly
- Palmrest assembly
- Troubleshooting
- Getting help
Latitude 5401 Service Manual
Installing display hinge
About this task
The figure indicates the location of the camera and provides a visual representation of the installation procedure.
Steps
- Place the display hinge on the display assembly.
- Replace the four (M2.5x3) screws to secure the display hinge to the display assembly.
Next steps
- Install the display panel.
- Install the display hinge caps.
- Install the display bezel.
- Install the display assembly.
- Install the battery.
- Install the base cover.
- Follow the procedure in After working inside your computer.
Veuillez évaluer cet article (1 à 5 étoiles).
Veuillez évaluer cet article (1 à 5 étoiles).
Veuillez évaluer cet article (1 à 5 étoiles).
Avez-vous trouvé cet article utile?
Les commentaires ne peuvent pas contenir ces caractères spéciaux : <>()\