Removing the display panel
About this task
The figure indicates the location of the display panel and provides a visual representation of the removal procedure.
Steps
- Locate the display panel on the display back cover assembly.
- Remove the two (M2.5x3) screws that secure the display panel to the
display assembly.
- Lift to turn over the display panel to
access the display cable.
- Peel the conductive tape on the display cable connector.
NOTE Do not pull and release the Stretch (SR) tapes from the display panel. There is no need to separate the brackets from the display panel.
-
Lift the latch and disconnect the display cable from the connector on the display panel.
Aucune donnée n’est disponible sur le sujet