Replacing the battery cable
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the battery cable and provides a visual representation of the installation procedure.
![Replacing the battery cable](https://dl.dell.com/content/guides/public/Html/latitude_5400_servicemanual/images/GUID-EC053E08-213A-4D15-AF45-3B1DB3EDE8CE-low.jpg)
Steps
- Align and place the battery cable on the battery.
- Route the battery cable through the routing guides on the battery.
- Connect the battery cable to the connector on the battery.
- Adhere the tape to secure the battery cable to the battery.
Aucune donnée n’est disponible sur le sujet