Remove the
two (M2.5x3) screws that secure the display panel to the display assembly [1] and lift to turn over the display panel to access the display cable [2].
Peel the conductive tape [1] on the display cable connector.
Remove the adhesive strip that secures the display cable connector [2].
Lift the latch and disconnect the display cable from the connector on the display panel
[3, 4].
NOTE:Do not pull and release the Stretch (SR) Tapes from the display panel. There is no need to separate the brackets from the display panel.
Aucune donnée n’est disponible sur le sujet
Veuillez évaluer cet article (1 à 5 étoiles).
Veuillez évaluer cet article (1 à 5 étoiles).
Veuillez évaluer cet article (1 à 5 étoiles).
Avez-vous trouvé cet article utile?
Les commentaires ne peuvent pas contenir ces caractères spéciaux : <>()\