Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Voir les commandes et de suivre l'état de votre expédition
  • Profitez membres seulement récompenses et des remises
  • Créez et accédez à une liste de vos produits
  • Gérez vos sites Dell EMC, vos produits et vos personnes-ressources pour les produits dans Administration de l’entreprise.

Dell Latitude 5400 Service Manual

Removing the DC-in port

Prerequisites

  1. Follow the procedure in before working inside your computer.
  2. Remove the microSD card.
  3. Remove the base cover.
  4. Remove the battery.

Steps

  1. Remove the two (M2x5) screws that secure the Type-C bracket to the system board [1].
  2. Lift the Type-C bracket away from the computer [2].
    Removing the DC-in port.
  3. Press the DC-in port cable and then pull the cable horizontally to disconnect the DC-in port cable from the connector on the system board [1]. Lift the DC-in port away from the computer [2].
    Removing the DC-in port.

  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Avez-vous trouvé cet article utile?
  Les commentaires ne peuvent pas contenir ces caractères spéciaux : <>()\