Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Voir les commandes et de suivre l'état de votre expédition
  • Profitez membres seulement récompenses et des remises
  • Créez et accédez à une liste de vos produits

Latitude 3310 2-in-1 Service Manual

Replacing the SSD support bracket

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.
  3. Disconnect the battery cable.
  4. Remove the M.2 2230 SSD.

About this task

The figure indicates the location of the SSD support bracket and provides a visual representation of the replace procedure.

SSD Bracket

Steps

  1. Slide and remove the SSD support bracket from the support bracket slot.
  2. Depending on the type of solid-state drive (M.2 2230/ M.2 2242/ M.2 2280), align and insert the SSD support bracket into the support bracket slot.
  3. Install the solid-state drive.

  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Avez-vous trouvé cet article utile?
  Les commentaires ne peuvent pas contenir ces caractères spéciaux : <>()\