Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Voir les commandes et de suivre l'état de votre expédition
  • Profitez membres seulement récompenses et des remises
  • Créez et accédez à une liste de vos produits

Latitude 3310 2-in-1 Service Manual

Removing the coin-cell battery

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.
  3. Disconnect the battery cable.

About this task

The figure indicates the location of the coin-cell and provides a visual representation of the removal procedure.

Coin cell

Steps

  1. Disconnect the coin-cell battery cable from the system board.
  2. Remove the coin-cell battery cable from the routing guide.
  3. Peel the coin-cell battery off the palmrest assembly as the coin-cell is affixed to the board with an adhesive.

  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Avez-vous trouvé cet article utile?
  Les commentaires ne peuvent pas contenir ces caractères spéciaux : <>()\