Installing the WLAN card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the WLAN card and provides a visual representation of the installation procedure.
Steps
- Align the notch on the WLAN card with the tab on the WLAN-card slot and insert the WLAN card at an angle into the WLAN-card slot.
- Connect the WLAN antenna cables to the WLAN card.
- Align and place the WLAN-card bracket to secure the WLAN card to the system board.
- Replace the single (M2x3) screw to secure the WLAN card to the system board.
Aucune donnée n’est disponible sur le sujet