Installing the system fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the system fan and provides a visual representation of the installation procedure.
Steps
- Locate the system fan slot on your computer.
- Align and place the system fan into the slot on the palmrest assembly.
- Replace the two (M2x3) screws to secure the system fan to the palmrest assembly.
- Connect the system fan cable to the connector on the system board.
- Route the wireless cable and connect it to the connector on the system board.
Aucune donnée n’est disponible sur le sujet