Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos

Dell PowerVault MD3060e Storage Enclosure Owner's Manual

Removing A Physical Disk From A Physical-Disk Carrier

  • CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
  1. Pull the edge of the physical-disk carrier away from the physical disk until the pins on the physical-disk carrier disengage from the slots on one side of the physical-disk.
  2. Hold the physical disk and angle the physical disk out of the physical-disk carrier.
    Figure 1. Removing and Installing the 2.5 Inch Physical Disk in a 2.5 Inch Physical-Disk Carrier This figure shows removing and installing a 2.5 inch physical disk from its carrier.
    1. 2.5 inch physical drive cage
    2. guide pins (4)
    3. release handle
    4. holes on physical disk (4)
    5. carrier for 2.5 inch physical disk
    6. 2.5 inch physical disk
    Figure 2. Removing and Installing the 3.5 Inch Physical Disk in a 3.5 Inch Physical-Disk Carrier This figure shows removing and installing a 3.5 inch physical disk from its carrier.
    1. 3.5 inch physical disk
    2. release handle
    3. slots on physical disk (4)
    4. side guide pin (4)
    5. carrier for 3.5 inch physical disk
    6. bottom guide pins (2). Removed from newer carriers

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"