Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell PowerEdge C4130 Owner's Manual

PDF

Removing the custom GPU brackets from the GPUs removed from your system

The Nvidia, Intel, or AMD brackets are installed on the Nvidia, Intel, or AMD GPUs shipped with your system. These brackets should be removed from the Nvidia, Intel, or AMD GPUs removed from your system and installed on the replacement GPUs.

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be performed only by Dell certified service technicians.

  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Keep the Philips #1 and #2 screwdrivers ready.
  3. Remove the GPU riser cable board.

NOTE: Depending on the type of Nvidia GPUs supported on your system, the location of the screws and type of GPU brackets will vary.

Steps

  1. Remove the screws securing the front I/O bracket to the GPU, and remove the I/O bracket.
  2. Remove the screws securing the support bracket to the GPU, and remove the support bracket.

    Removing the custom Nvidia GPU I/O brackets and the support brackets:

    Figure 1. Removing the custom Nvidia GPU I/O brackets and the support brackets
    This figure shows removing the custom Nvidia GPU I/O brackets and the support brackets.
    1. Torx screw (2)
    2. support bracket
    3. GPU
    4. I/O bracket
    5. screw (5)

    Removing the custom Intel GPU I/O brackets and the support brackets :

    Figure 2. Removing the custom Intel GPU I/O brackets and the support brackets
    This figure shows removing the custom Intel GPU I/O brackets and the support brackets.
    1. support bracket
    2. GPU
    3. screw (8)
    4. I/O bracket

    Removing the custom AMD I/O brackets and the support brackets:

    Figure 3. Removing the custom AMD I/O brackets and the support brackets
    This figure shows removing the custom AMD GPU I/O brackets and the support brackets.
    1. pan head screw
    2. screw (4)
    3. support bracket
    4. GPU
    5. alignment guide
    6. I/O bracket
    7. flat head screw (2)

Next steps

Remove the GPU brackets from the replacement GPUs.

NOTE: This procedure is not applicable to the AMD GPUs since the replacement AMD GPUs are shipped without brackets.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"