Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell PowerEdge C4130 Owner's Manual

PDF

Installing the system top cover (back)

Prerequisites

  1. Follow the safety guidelines listed in the safety instructions section.
  2. Ensure that all internal cables are connected and routed correctly.
  3. Keep the Phillips #1 screwdriver ready.

CAUTION: Closing the system cover with incorrect cable routing can damage the cables.

Steps

  1. Align the slots of the system top cover with the tabs on the chassis.
  2. Align the guide pin on the back of the chassis with the guide slot on the back of the cover.
  3. Slide the cover towards the front of the chassis until the guide pin on the back of the chassis locks on the back of the cover.
  4. Secure the system top cover to the chassis by using the screws.
    Figure 1. Installing the system top cover (back)
    This figure shows installing the system top cover (back).
    1. system top cover (back)
    2. guide slot on the system cover
    3. tab on the chassis (6)
    4. screw (2)

Next steps

CAUTION: Turn on the system only when both the system top covers are installed.

  1. Install the system into the rack.
  2. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"