Ir al contenido principal
Cerrar sesión

Le damos la bienvenida a Dell

Mi cuenta
  • Realice pedidos rápida y fácilmente.
  • Vea los pedidos y haga el seguimiento del estado del envío.
  • Cree una lista de sus productos y acceda a ella
Iniciar sesión Crear una cuenta Inicio de sesión en Premier Iniciar sesión en el programa para socios
Contáctenos

Sus carritos de Dell.com

Dell PowerEdge R430 Owner's Manual

PDF

Troubleshooting expansion cards

Prerequisites

CAUTION Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.
NOTE When troubleshooting an expansion card, you also have to see the documentation for your operating system and the expansion card.
NOTE Riser slots are not hot-pluggable.

Steps

  1. Run the appropriate diagnostic test. See the Using system diagnostics section.
  2. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
  3. Remove the system cover.
  4. Ensure that each expansion card is firmly seated in its connector.
  5. Install the system cover.
  6. Turn on the system and attached peripherals.
  7. If the problem is not resolved, turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
  8. Remove the system cover.
  9. Remove all expansion cards installed in the system.
  10. Install the system cover.
  11. Run the appropriate diagnostic test. See the Using system diagnostics section.
  12. For each expansion card you removed in step 8, perform the following steps:
    1. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
    2. Remove the system cover.
    3. Reinstall one of the expansion cards.
    4. Install the system cover.
    5. Run the appropriate diagnostic test. See the Using system diagnostics section.

Valore este contenido

Acertado
Útil
Fácil de entender
¿Le ha resultado útil este artículo?
0/3000 characters
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Seleccione si el artículo le ha resultado útil o no.
  Los comentarios no pueden contener caracteres especiales: <>()\