Ir al contenido principal
  • Realice pedidos rápida y fácilmente.
  • Vea los pedidos y haga el seguimiento del estado del envío.
  • Cree una lista de sus productos y acceda a ella

Dell PowerEdge R430 Owner's Manual

Removing a 2.5-inch hard drive blank

Prerequisites

CAUTION Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.
CAUTION To maintain proper system cooling, all empty hard drive slots must have hard drive blanks installed.
  1. Follow the safety guidelines listed in the Safety instructions section.
  2. If installed, remove the front bezel.

Steps

Press the release button and slide the hard drive blank out of the hard drive slot.
Figure 1. Removing a 2.5-inch hard drive blank
This figure shows removing 2.5-inch hard drive blank.
  1. hard drive blank
  2. release button

Next steps

If removed, install the front bezel.


Valore este contenido

Acertado
Útil
Fácil de entender
¿Le ha resultado útil este artículo?
0/3000 characters
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Seleccione si el artículo le ha resultado útil o no.
  Los comentarios no pueden contener caracteres especiales: <>()\