Ir al contenido principal
  • Realice pedidos rápida y fácilmente.
  • Vea los pedidos y haga el seguimiento del estado del envío.
  • Cree una lista de sus productos y acceda a ella
  • Gestione sus sitios, productos y contactos a nivel de producto de Dell EMC con la administración de empresa.

Dell PowerEdge R430 Owner's Manual

Installing the expansion card riser

Prerequisites

  1. Install the expansion card into the expansion card riser.

Steps

  1. Align the following:
    1. Guide on the expansion-card riser with the guide pin on the system board.
    2. Expansion card riser latch with the slot on the chassis.
  2. Lower the expansion card riser until the expansion card riser is firmly seated in the connector on the system board.
  3. Close the expansion card riser latch.
    Figure 1. Installing the expansion card riser
    This figure shows installing the expansion card riser.
    1. expansion card riser
    2. guide on the expansion card riser
    3. guide pin on the system board
    4. riser connector on the system board
    5. slot on the chassis
    6. expansion card latch

Valore este contenido

Acertado
Útil
Fácil de entender
¿Le ha resultado útil este artículo?
0/3000 characters
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Seleccione si el artículo le ha resultado útil o no.
  Los comentarios no pueden contener caracteres especiales: <>()\