Ir al contenido principal
  • Realice pedidos rápida y fácilmente.
  • Vea los pedidos y haga el seguimiento del estado del envío.
  • Cree una lista de sus productos y acceda a ella
  • Gestione sus sitios, productos y contactos a nivel de producto de Dell EMC con la administración de empresa.

Dell PowerEdge R430 Owner's Manual

Expansion card installation guidelines

Your system supports Generation 1, Generation 2, and Generation 3 cards. The following table provides riser configurations for R430 systems:

NOTE Full-height: 312mm, Half-height: 175.26mm, Low-profile: 119.91mm.
Table 1. Expansion card slots available on the expansion-card riserThis table describes about the Expansion card slots available on the expansion-card riser.
PCIe slot on the expansion card riser Processor Link width Slot width Height Length

PCIE_G3_x8 /
Butterfly riser

Right - Slot 1 1 x8 x16 Full height Half length
Left - Slot 2 x8 x16 Half height Half length

PCIE_G3_x16 /
Left or right riser

Right riser - Slot 1 1 x16 x16 Half height Half length
Left riser - Slot 2x16x16 Half height Half length
PCIE_BTB_x16 2 Not supported Not supported
NOTE The PCIE_G3_X8 and PCIE_G3_X16 are the two different types of risers supported on R430 systems. You can install an expansion card on the system board only using expansion-card riser.
NOTE The expansion cards are not hot-swappable.

The following table provides a guide for installing expansion cards to ensure proper cooling and mechanical fit. The expansion cards with the highest priority must be installed first using the slot priority indicated. All other expansion cards must be installed in card priority and slot priority order.

Table 2. Expansion card installation order (Low Profile + Low Profile configuration)This table describes about the Expansion card installation order (Low Profile + Low Profile configuration)
Card priority Card type Slot priority Maximum allowed
1 RAID Integrated Storage Integrated Slot 1
RAID External Storage 2, 1 1
2 Infiniband single Port/Dual (Mellanox) 2, 1 2
3 40 Gb NICs 2, 1 2
4 10 Gb NICs 2, 1 2
5 FC8 HBA 2, 1 2
6 1 Gb NICs 2, 1 2
7 12 GB SAS HBA 2, 1 2
HBA330 Integrated Slot 1
Table 3. Expansion card installation order (Full Height +Low Profile configuration)This table describes about the Expansion card installation order (Full Height +Low Profile configuration)
Card priority Card type Slot priority Maximum allowed
1 RAID Integrated Storage Integrated Slot 1
RAID External Storage Low Profile 2 1
RAID External Storage Full Height 1 1
2 Infiniband Single Port/Dual Port (Mellanox) 2 1
3 40 Gb NICs (Low profile) 2 1
40 Gb NICs (Full height) 1 1
4 10 Gb NICs (Low profile) 2 1
10 Gb NICs (Full height) 1 1
5 FC8 HBA (Low profile) 2 1
FC8 HBA (Full height) 1 1
6 1 Gb NICs (Low profile) 2 1
1 Gb NICs (Full height) 1 1
7 12 GB-SAS-HBA (Low profile) 2 1
12 GB-SAS-HBA (Full height) 1 1
8 Non-RAID HBA330 Integrated Slot 1

Valore este contenido

Acertado
Útil
Fácil de entender
¿Le ha resultado útil este artículo?
0/3000 characters
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Seleccione si el artículo le ha resultado útil o no.
  Los comentarios no pueden contener caracteres especiales: <>()\