Ir al contenido principal
  • Realice pedidos rápida y fácilmente.
  • Vea los pedidos y haga el seguimiento del estado del envío.
  • Cree una lista de sus productos y acceda a ella

Dell PowerEdge M1000e Enclosure Owner's Manual

Removing The Control Panel

  • CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
  1. Press the system power switch to turn off the system.
  2. Remove the blades.
  3. Remove the bezel.
  4. Remove the two screws securing the control panel to the enclosure.
  5. Press the catch at each end of the control-panel cable connector, and remove the control-panel cable from the underside of the control panel.
  6. Use the pull-tab to disconnect the LCD panel cable from the underside of the control panel.
    Figure 1. Removing and Installing the Control Panel This figure shows Removing and Installing the Control Panel
    1. control panel
    2. control-panel cable
    3. screws (2)
    4. LCD panel cable

Valore este contenido

Acertado
Útil
Fácil de entender
¿Le ha resultado útil este artículo?
0/3000 characters
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Seleccione si el artículo le ha resultado útil o no.
  Los comentarios no pueden contener caracteres especiales: <>()\