Ir al contenido principal
Cerrar sesión

Le damos la bienvenida a Dell

Mi cuenta
  • Realice pedidos rápida y fácilmente.
  • Vea los pedidos y haga el seguimiento del estado del envío.
  • Cree una lista de sus productos y acceda a ella
Iniciar sesión Crear una cuenta Inicio de sesión en Premier Iniciar sesión en el programa para socios
Contáctenos

Sus carritos de Dell.com

Dell PowerEdge M1000e Enclosure Owner's Manual

PDF

Configuring The CMC Using The LCD Configuration Wizard

When you first boot your system, the screen on the LCD module directs you to configure the CMC network settings.

  • NOTE: The option to configure the enclosure using the LCD configuration wizard is only available until the CMC default password is changed or when the LCD configuration wizard is complete. Thereafter, use the RACADM CLI or the web-based GUI to change the CMC settings.
  • NOTE: The serial null modem cable for the CMC is an option. You can access the CLI using the 17th blade feature on the embedded iKVM module. Blade number 17 is a direct local connection to the CMC.
  1. Choose a language from the options in the dialog box.
  2. Start the LCD configuration wizard.
  3. Configure the CMC network settings for your network environment.
    • Network speed
    • Duplex mode
    • Protocol (IPv4 and/or IPv6)
    • Network mode (DHCP or static)
    • Static IP address, subnet mask, and gateway values (if static mode was selected)
    • DNS setting, including a registered CMC name, (if DHCP mode was selected)
    • NOTE: The CMC external management network mode is set by default to DHCP. To use a static IP address, you must change the setting using the LCD configuration wizard.
  4. If required, configure the iDRAC network setting for DHCP mode.
    • NOTE: You cannot set a static IP address for the iDRAC using the LCD configuration wizard. To set the static IP address, use the web-based interface.
  5. Review the settings on the Network Summary screen:
    • If the settings are correct, press the center button to close the configuration wizard and return to the Main Menu.
    • If the settings are not correct, use the left-arrow key to return to the screen for that setting and make the appropriate changes.

    The Network Summary screen lists the IP addresses for the CMC and the iDRAC network settings.

After you complete the LCD configuration wizard, you can access the CMC on the network using the web-based CMC interface or text-based interfaces such as a serial console, Telnet, or SSH.

  • NOTE: If you want to use static addresses rather than DHCP to access the iDRACs, you must configure them using the CMC web-based interface or CLI.

Valore este contenido

Acertado
Útil
Fácil de entender
¿Le ha resultado útil este artículo?
0/3000 characters
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Seleccione si el artículo le ha resultado útil o no.
  Los comentarios no pueden contener caracteres especiales: <>()\