Latitude 3480 Owner's Manual

Running the ePSA diagnostics

1. Power-on the computer.
2. As the computer boots, press the F12 key as the Dell logo appears.
3. On the boot menu screen, select the Diagnostics option.
   The Enhanced Pre-boot System Assessment window is displayed.
4. Click the arrow key at the bottom left corner.
   Diagnostics front page is displayed.
5. Press the arrow in the lower-right corner to go to the page listing.
   The items detected are listed.
6. To run a diagnostic test on a specific device, press Esc and click Yes to stop the diagnostic test.
7. Select the device from the left pane and click Run Tests.
8. If there are any issues, error codes are displayed.
   Note the error code and validation number and contact Dell.