Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell G15 5510 Setup and Specifications

Display

The following table lists the display specifications of your Dell G15 5510.

Table 1. Display specifications

The following table provides the detailed display specifications of Dell G15 5510.

Description Option one Option two Option three
Display type

Full High Definition (FHD)

Full High Definition (FHD)

Full High Definition (FHD)

Display-panel technology

Wide-Viewing Angle (WVA)

Wide-Viewing Angle (WVA)

Wide-Viewing Angle (WVA)

Display-panel dimensions (active area):
Height

193.59 mm (7.62 in.)

193.59 mm (7.62 in.)

139.59 mm (5.50 in.)

Width

344.16 mm (13.55 in.)

344.16 mm (13.55 in.)

344.16 mm (13.55 in.)

Diagonal

395 mm (15.55 in.)

395 mm (15.55 in.)

395 mm (15.55 in.)

Display-panel native resolution

1920 x 1080

1920 x 1080

1920 x 1080

Luminance (typical)

250 nits

300 nits

300 nits

Megapixels

2.07

2.07

2.07

Color gamut (typical)

45% NTSC

100% sRGB

72% NTSC

Pixels Per Inch (PPI)

141

141

141

Contrast ratio (typical)

600 : 1

800 : 1

800 : 1

Response time (maximum)

35 ms

13 ms

19 ms

Refresh rate

120 Hz

165 Hz

144 Hz

Horizontal view angle

80 +/- degrees (minimum)

80 +/- degrees (minimum)

85 +/- degrees

Vertical view angle

80 +/- degrees (minimum)

80 +/- degrees (minimum)

85 +/- degrees

Pixel pitch

0.17925 mm x 0.17925 mm

0.17925 mm x 0.17925 mm

0.18 mm

Power consumption (maximum)

4.60 W

6 W

7.8 W

Anti-glare vs glossy finish

Anti-glare

Anti-glare

Anti-glare

Touch options

No

No

No


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\