Menu Item
|
Description
|
Integrated RAID Controller
|
Allows you to enable or disable the integrated RAID controller.
By default, the
Integrated RAID Controller option
is set to
Enabled.
|
User Accessible USB Ports
|
Allows you enable or disable the user accessible USB ports. Selecting
Only Back Ports On disables the front USB ports and selecting
All Ports Off disables both front and back USB ports.
By default, the
User Accessible USB Ports option
is set to
All Ports On.
|
Internal USB Port
|
Allows you to enable or disable the internal USB port. By default,
the
Internal USB Port option is set to
On.
|
Internal SD Card Port
|
Enables or disables the system’s internal SD card port. By default,
the
Internal SD Card Port option is set to
On.
-
NOTE: This option is displayed only if IDSDM is installed on the system
board.
|
Internal SD Card Redundancy
|
If set to
Mirror mode, data is written
on both SD cards. If any one of the SD card fails, data is written
to the active SD card. Data from this card is copied to the replacement
SD card at the next boot. By default,
Internal SD Card
Redundancy
option is set to
Mirror.
-
NOTE: This option
is displayed only if IDSDM is installed on the system board.
|
Integrated Network Card 1
|
Allows you to enable or disable the integrated network card 1.
By default, the
Integrated Network Card 1 option
is set to
Enabled.
|
OS Watchdog Timer
|
Allows you to enable or disable the OS watchdog timer. When this
field is enabled, the operating system initializes the timer and the
OS watchdog timer helps in recovering the operating system. By default,
the
OS Watchdog Timer option is set to
Disabled.
|
Embedded Video Controller
|
Allows you to enable or disable the
Embedded Video
Controller
. By default, the embedded video controller
is set to
Enabled.
|
SR-IOV Global Enable
|
Allows you to enable or disable the BIOS configuration of Single
Root I/O Virtualization (SR-IOV) devices. By default, the
SR-IOV Global Enable option is set to
Disabled.
|
Memory Mapped I/O above 4GB
|
Allows you to enable support for PCIe devices that require large
amounts of memory. By default, the option is set to
Enabled.
|
Slot Disablement
|
Allows you to enable or disable available PCIe slots on your system.
The
Slot Disablement feature controls the configuration
of PCIe cards installed in the specified slot.
-
CAUTION: Slot
disablement must be used only when the installed peripheral card is
preventing booting into the Operating System or causing delays in
system startup. If the slot is disabled, both the Option ROM and UEFI
driver are disabled.
|