Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

XPS 27 Service Manual

PDF

Procedure

  • CAUTION: To avoid damaging the wireless card, do not place any cables under it.
  1. Align the notch on the wireless card with the tab on the wireless-card slot and slide the wireless card into the wireless-card slot.
  2. Route the antenna cable through the routing guide.
  3. Connect the antenna cables to the wireless card. The following table provides the antenna-cable color scheme for the wireless card supported by your computer:
    Table 1. : Wirelesscard colour scheme . The following table provides the antenna-cable color scheme for the wireless card supported by your computer.
    Connectors on the wireless card Antenna-cable color
    Main (white triangle) White
    Auxiliary (black triangle) Black
  4. Press down the other end of the wireless card and align the screw hole on the wireless-card bracket and wireless card with the screw hole on the system board.
  5. Replace the screw (M2X2.5) that secures the wireless-card bracket and the wireless card to the system board.
  6. Align the screw holes on the wireless-card shield with the screw holes on the system board.
  7. Replace the two screws (M2X2.5) that secures the wireless-card shield to system board.
  8. Route the antenna cables through the securing clip. Image: Replacing the wireless card

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\