XPS 15 2-in-1 Service Manual

Procedure

1. Using the alignment posts, place the system board on the palm-rest and keyboard assembly and align the screw holes on the system board with the screw holes on the palm-rest assembly.
2. Replace the 2 screws (M2x3) that secure the system board to the palm-rest and keyboard assembly.
3. Align the screw holes on the type-C USB bracket with the screw holes on the system board and replace the three screws (M2x4) that secure the type-C USB bracket to system board.
   
4. Connect the coin-cell battery cable to the system board.
5. Connect the fingerprint-reader cable to the system board and close the latch.
6. Connect the keyboard-back light cable to the system board and close the latch.
7. Connect the display cable to the system board.
8. Place the display-cable bracket on the system board and replace the two screws (M1.6x1.8) that secure the bracket to the system board.
9. Adhere the tape that secures the display-cable bracket to the system board.
10. Connect the camera cable to the system board and close the latch.