XPS 15 2-in-1 Service Manual

Procedure

1. Place the heat sink on the system board and align the screw holes on the heat sink with the screw holes on the system board.
2. In sequential order (as indicated on the heat sink), replace the five screws (M2x3) that secure the heat sink to the system board.
3. Replace the screw (M2x3) that secures the heat sink to the palm-rest and keyboard assembly.
   
4. Place the heat-sink shield on the slots on the system board and press down the heat-sink shield to snap it into place.
5. Adhere the tape that secures the heat-sink shield to the system board.