XPS 13 9305 Service Manual

Procedure

1. Align the screw holes on the heat-sink and fan assembly with the screw holes on the system board.
2. Replace the two screws (M1.6x3) that secure the heat-sink and fan assembly to the system board.
3. Replace the four screws (M2x3) that secure the heat-sink and fan assembly to the system board in sequential order (as indicated on the heat-sink and fan assembly).
4. Connect the right fan cable to the system board.
5. Connect the left fan cable to the system board.
   
6. Connect the camera cable to the system board.
7. Align the screw hole on the wireless antenna and camera-cable bracket to the screw hole on the system board
8. Replace the screw (M1.6x3) that secures the wireless antenna and camera-cable bracket to the system board.