XPS 13 9305 Service Manual

Procedure

1. Ensure that the hinges are open to a 90-degree angle. Slide the palm-rest assembly under the hinges of the display assembly.
   
2. Using the alignment posts, press the display hinges down on the palm-rest assembly, aligning the screw holes on the display hinges with the screw holes on the palm-rest assembly.
3. Connect the antenna cables to the system board.
   The following table provides the antenna cable color schemes for the wireless card supported by your computer.

   Table 1. Antenna-cable color schemeThe following table lists connectors on the wireless card and the color scheme of the antenna cable.

   Connectors on the wireless card	Antenna-cable color
   Main (white triangle)	White
   Auxiliary (black triangle)	Black

   
4. Replace the four screws (M2.5x4) securing the display hinges to the palm-rest assembly and connect the camera cable to the system board, adhering the tape securing the camera cable to the fans.
5. Align the screw hole on the wireless antenna and camera cable bracket to screw hole on the system board.
6. Replace the screw (M1.6x3) that secures the wireless antenna and camera cable bracket to the system board.
7. Connect the display cable to the system board.
8. Align the screw holes on the display-cable bracket with the screw holes on the system board.
9. Replace the two screws (M1.6x2.5) that secure the display-cable bracket to system board.