Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

XPS 13 7390 2-in-1 Service Manual

PDF

Installing the display assembly

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following images indicate the location of display assembly and provide a visual representation of the installation procedure.

Image: Installing the display assembly

Image: Connecting the display cable and camera cable

Steps

  1. Slide the palm-rest assembly under the display assembly.
  2. Align the screw holes on the palm-rest assembly with the screw holes on the display hinges.
  3. Replace the four screws (M2.5x3) that secure the display hinges to the palm-rest assembly.
  4. Route the display cable and camera cable through the routing guides on the system board.
  5. Connect the display cable and camera cable to the system board.
  6. Adhere the tapes that secure the display cable and camera cable to the system board.
  7. Align and place the display-cable bracket on the system board.
  8. Tighten the captive screw (M1.6x3) that secures the display-cable bracket to the system board.

Next steps

  1. Install the battery.
  2. Install the base cover.
  3. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\