Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

XPS 13 7390 2-in-1 Service Manual

PDF

Installing the battery

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the battery and provides a visual representation of the installation procedure.

Image: Installing the battery

Steps

  1. Adhere the magnet and the metal bar to the battery.
    NOTE: Install the magnet and the metal bar from the faulty battery.
  2. Align the screw holes on the battery with the screw holes on the system board and palm-rest assembly.
  3. Replace the two screws (M1.2x4) that secure the battery to the system board.
  4. Replace the seven screws (M1.6x3) that secure the battery to the palm-rest assembly.
  5. Place the interposer board to the connector on the system board.
    NOTE: The interposer board is not polarity sensitive and both sides are compatible.
  6. Connect the battery cable to the interposer board.
  7. Replace the Torx 5 screw (M1.6x3.4) that secures the battery cable to the system board.

Next steps

  1. Install the base cover.
  2. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\