Power state
Wyse 5060 thin client running WES7P.
You can change
the power state options of the thin client device by following the
steps mentioned here:
- On the task bar, click the Start button.
- From the Start menu, point to the arrow next to the log
off button, and then click any one of the following:
- Restart— To restart your thin client.
Sleep— This mode enables the power-saving state and allows
the thin client to quickly resume full power operations when you want
to start working again.
Shut down– Preferred for orderly closing of the operating
system.
- You can also log off the thin client by any of the following ways:
NOTE:If automatic
logon is enabled, the thin client will immediately logs on to the
default user desktop. We recommend you use Shut down button
to turn off your thin client.
Wyse 5060 thin client running Wyse ThinOS.
Use the Shutdown dialog box to select the available option you want:
- Classic Desktop — Click Shutdown in the Connect
Manager or Desktop Menu.
- Zero Desktop — Click the Shutdown icon on the
Zero Toolbar.
Wyse 5060 thin client running Wyse ThinLinux
On your initial configuration, Dell recommends
that you connect by using a wired connection by plugging in the network
connected Ethernet cable to your thin client.
After you turn on
your thin client, you are automatically logged in to the thinuser
account. By default, the password of the thinuser account is set to
thinuser.
NOTE:In cases where a GDM login is needed (for example, AD/Domain login,
PNAgent login and so on), the auto-login option can be turned off
through the GUI or by using the INI.
Admin mode
enables you to perform system administration tasks such as adding
or removing connections and setting up specific device settings. To
enter into the Admin mode, click the Switch to Admin button
from Setting application screen to admin mode and then enter the default
root password in the Password Needed window. The default root
password is admin.
Wyse 5060 thin client
running WIE10
You can change the power state
options of the thin client device by following the steps mentioned
here:
- On the taskbar, click the Start Menu button.
- Click Power on the start menu,
and select any of the options:
- Sleep– This mode uses little power, your thin
client device starts up faster.
- Shut down– Preferred for orderly closing of
the operating system.
- Restart–The thin client device is turned off
and turned on instantly.
You can also use the power state options by pressing the
ALT+F4 key combination, and then selecting your preferred option from
the drop-down list.
NOTE:If automatic logon is enabled, the thin client will immediately log
on to the default user desktop.