TL-816 | The Wyse 5070 thin client device picture is not available in the Wyse Management Suite server. |
TL-866 | The Device type field is blank on the Wyse Management Suite server UI. |
TL-891 | AD PAM login: Device unlock
may take more than 10 seconds. |
TL-931 | In the Screen Capture display
window,
CCM
must be renamed to
WMS. |
TL-945 | In a dual display setup, taskbar icons disappear when the monitor rotation is set to left or right. |
TL-974 | Unable to disable the MultiMedia option in a Citrix session by using the INI parameter. |
TL-985 | When a Citrix server connection is established using an INI parameter, the session is launched in a seamless resolution instead of the default resolution. |
TL-900 | Common Access Card (CAC) is not recognized when an onboard reader is used with a smart card to log in to a VDI session. |
TL-944 | In a dual display setup, the Citrix session cannot be launched on both monitors in span mode. This issue is observed when you set the rotation of monitor 1 as left and monitor 2 as right. |
TL-947 | Intel Bluetooth Adapter is listed in the Connect USB Device menu
when the INI parameter VMWareViewExcludeUSBFamily is configured. |
TL-956 | Disks and drives details for ThinLinux are displayed incorrectly in WDM. |
TL-961 | Sound is set to blank in the
Experience
tab when an RDP connection is created
using the INI parameter
Sound=off. |
TL-963 | Two Citrix links are available in System Settings. However, the desktops cannot be enumerated when the Citrix add-on is upgraded to a new version. |
TL-964 | The Show Favorites
option from
the view
menu is disabled when the option is enabled after
launching a session. |
TL-966 | When the VMware connection is created using an
INI parameter,
the Enable MMR
option is disabled for PCoIP and Blast
protocols.
|
TL-970 | On Wyse 5070 thin client (Pentium processor), the default resolution 1920 x 1080 is not available in a VGA display for connecting two monitors. |
TL-975 | If Citrix RTME is uninstalled and installed again, the Multimedia redirection feature does not work. |
TL-977 | GDM fails when you turn on the device without connecting the monitor. |
TL-983 | Any message from the Wyse Management Suite admin is not displayed after 60 characters even though the message contains no space. |
TL-986 | In a PAM login, the shortcut key Alt+Ctrl+Shift+F11 to switch to admin mode does not work. |
TL-991 | On Wyse 5070 thin client (Pentium processor), the INI parameter for the display setting does not work when you turn off and turn on the network. |
TL-997 | During the AD PAM login, the display configuration does not take effect when you change the display settings in thinuser. |
TL-1000 | Add-ons are not removed from the thin client when the Advanced-RemoveAddons policy is published from Wyse Management Suite. |
TL-1001 | Keyboard UI settings are not available for the Dutch language. |
TL-1010 | 3 displays: The System Settings window does not remain on the secondary monitor when you click the Back button. |
TL-1011 | When six monitors are connected, a black screen is displayed for a few seconds after every device reboot. |
TL-1012 | 6 displays: There is no display when the monitor is connected to any Mini DisplayPort by using a Mini DisplayPort to VGA convertor. |
TL-1013 | In a dual display setup, the VMware session cannot be extended on both monitors. This issue is observed when you set the rotation of monitor 1 as left and monitor 2 as right. |
TL-1014 | In a dual display setup, the RDP session is extended on both monitors. This issue is observed when you set the rotation of monitor 1 as left and monitor 2 as right. |