- Notes, cautions, and warnings
- Welcome to Dell Wyse 3040 thin client
- Wyse 3040 thin client hardware installation
- Wyse 3040 thin client on ThinOS
- Logging on to the Wyse 3040 thin client running Wyse ThinOS
- Configuring the dual head display settings in Dell Wyse ThinOS
- Configuring the network settings on Dell Wyse ThinOS
- Configuring peripherals settings on Wyse ThinOS
- Power state
- Configuring the broker setup on Dell Wyse ThinOS
- Configuring the WDA settings on Dell Wyse ThinOS
- Wyse 3040 thin client on ThinLinux
- Accessing thin client BIOS settings on Wyse ThinLinux
- Logging on to the Wyse 3040 thin client running ThinLinux
- Configuring display on Dell Wyse ThinLinux
- Configuring the network settings on Dell WyseThinLinux
- Configuring peripherals settings on Wyse ThinLinux
- Power state
- Configuring connections locally on Dell Wyse ThinLinux
- Configuring WDA settings on Dell Wyse ThinLinux
- Major components of your system
- Removing and installing components
- System specifications
- Thermal management on Wyse 3040 thin client
- BIOS overview
- Accessing thin client BIOS settings
- System Setup overview
- Boot Sequence
- Navigation keys
- General screen options
- System Configuration screen options
- Security screen options
- Secure Boot screen options
- Performance screen options
- Power Management screen options
- POST Behavior screen options
- Virtualization support screen options
- Maintenance screen options
- System Log screen options
- Updating the BIOS
- Troubleshooting your system
Dell Wyse 3040 Thin Client User Guide
Configuring and managing VMware connections
The VMware
connections page enables you to create and manage the View client
3.5 connections.
To configure
the VMware Settings, complete the following task:
Click the + icon to add a new VMware Connection.
The VMware Connections page is displayed.
Figure 1. VMware connections settings 
Enter the name of the VMware connection.
- Configure
the following options in the Login tab:
Figure 2. VMware login settings 
Table 1. Login parametersThis tables provides the Login parameters. Parameter
Description
Host
Enter the host name or IP address or FQDN of the Horizon of the VMware View Server.
Port
Enter the port number of the host.
Protocol
From the drop-down list, select the specific protocol.
Username
Enter the User ID that is used to log in to the remote Horizon server.
Password
Enter the password that is used to log in to the remote Horizon server.
Published Application
Click the ON/OFF button to enable or disable this option.
If enabled, specify the Published Application name.
If disabled, specify the Published desktop name.
Enable interactive mode
Click the ON/OFF button to enable or disable this option.
If enabled, then after a successful connection to the server, it displays all the published application and desktop icons. You can start the applications or desktop sessions based on your choice.
If disabled, then the Published Applications option is enabled in the Login tab.
Selecting that option enables you to directly start the application or desktop that you specify.
Ping before connect
Click the ON/OFF button to enable or disable this option. If enabled, it pings the connection is checked in server IP/FQDN before connecting to a session.
Enable NLA
Click the ON/OFF button to enable or disable this option. Enable the Network Level Authentication (NLA), if NLA is enabled on your remote computer. Your remote computer requires NLA user authentication before you establish a full Remote Desktop connection and the login screen is displayed.
Secure connection
Click the Secure Preferences tab and select any of the options that determine how the client should proceed when it cannot verify that your connection to the server is secure.
Domain
Enter the Domain name. It is used to log in the remote Horizon server.
Desktop
If interactive mode is disabled, you can specify Published desktop name.
Application
If interactive mode is disabled, you can specify the Published application name.
- The following options must be configured in the Experience tab:
Figure 3. VMware experience settings 
Table 2. Experience setting parametersExperience setting parameters Parameter
Description
Windows resolution
Select the Windows resolution that you want to get the best display on your monitor. The available resolutions are:
Use All Monitors
Full Screen
Large Screen
Small Screen
1024X768
800X600
640X480
Auto-Reconnect after disconnect.
Click the ON/OFF button to enable or disable this option. If enabled, the connection is automatically re-established after you disconnect from the session.
Delay (seconds) before reconnect.
Select the amount of time in seconds to delay the reconnection attempt after a disconnection occurs.
Enable fullscreen
Click the ON/OFF button to enable or disable this option. Select this option to view the remote session in full screen mode in all the monitors.
Disable fullscreen drop-down menu bar
Click the ON/OFF button to enable or disable this option.
Select this option to disable the drop-down menu bar in the full screen mode.
Disable exit on the disconnect
Click the ON/OFF button to enable or disable this option.
Select this option if you do not want the Horizon server to retry connecting if there is a connection error. You can typically select this option if you use kiosk mode.
Auto-connect after login.
Click the ON/OFF button to enable or disable this option.
Select this option to reconnect automatically after a disconnection occurs.
Lock server URL/Host field
Click the ON/OFF button to enable or disable this option.
- Click Save to save the settings.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\