- Notes, cautions, and warnings
- Revision history
- Introduction
- System overview
- Initial setup and configuration
- Pre-operating system management applications
- Replacement of hardware components
- System diagnostics and indicator codes
The following figure shows the rear view of VxRail P670F (single-socket configuration):
The following table describes the ports, panels, or slots for the rear view of the system:
Item | Ports, panels, or slots | Icon | Description |
---|---|---|---|
1 | PCIe expansion card riser 1 (slot 1 and slot 2) | N/A | Enables connectivity to the PCI Express expansion cards. For more information, see Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. |
2 | BOSS S2 module | N/A | Supports the BOSS S2 module. |
3 | PCIe expansion card riser 2 (slot 3) | N/A | Enables connectivity to the PCI Express expansion cards. For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. |
4 | OCP NIC port | N/A | Supports OCP 3.0. The NIC ports are integrated on the OCP card which is connected to the system board. |
5 | USB 2.0 port (1) | This port is USB 2.0-compliant. | |
6 | Power supply unit (PSU 2) | For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. | |
7 | VGA port | For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. | |
8 | USB 3.0 port (1) | This port is USB 3.0-compliant. | |
9 | iDRAC dedicated port | Enables remote access iDRAC. For more information, see the iDRAC User's Guide. | |
10 | System identification button | Press System ID to locate a particular system within a rack or power the system ID on or off: To reset iDRAC, press and hold the button for 16 seconds or more.
| |
11 | NIC port (1,2) | The NIC ports are embedded on the LOM card that is connected to the system board. | |
12 | Power supply unit (PSU 1) | For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. |
For more information about supported drives, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications.
The following figure shows the rear view of the VxRail P670F (dual-socket configuration) and S670 with 4 x 2.5-inch rear drive module:
The following table provides the ports, panels, or slots for the rear view of the VxRail P670F (dual-socket configuration) and S670 with 4 x 2.5-inch rear drive module:
Item | Ports, panels, or slots | Icon | Description |
---|---|---|---|
1 | Rear drive module | N/A | Installs supported drives on your system. For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. |
2 | PCIe expansion card riser 2 (slot 3 and slot 6) | N/A | Enables connectivity to the PCI Express expansion cards. For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. |
3 | Rear handle | N/A | Lift the system. |
4 | BOSS S2 module | N/A | Supports the BOSS S2 module. |
5 | USB 2.0 port (1) | This port is USB 2.0-compliant. | |
6 | PCIe expansion card riser 4 (slot 7 and slot 8) | N/A | Enables connectivity to the PCI Express expansion cards. For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. |
7 | Power supply unit (PSU 2) | For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. | |
8 | VGA port | For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. | |
9 | USB 3.0 port (1) | This port is USB 3.0-compliant. | |
10 | iDRAC dedicated port | Enables remote access iDRAC. For more information, see the iDRAC User's Guide. | |
11 | System identification button | Press System ID to locate a particular system within a rack or power the system ID on or off: To reset iDRAC, press and hold the button for 16 seconds or more.
| |
12 | OCP NIC port | N/A | This port supports OCP 3.0. The NIC ports are integrated on the OCP card which is connected to the system board. |
13 | NIC port (1,2) | The NIC ports are embedded on the LOM card that is connected to the system board. | |
14 | Power supply unit (PSU 1) | For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. |
For more information about supported drives, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications.
The following figure shows the rear view of the VxRail P670N and V670F:
The following table provides the ports, panels, or slots for the rear view of the VxRail P670N and V670F:
Item | Ports, panels, or slots | Icon | Description |
---|---|---|---|
1 | PCIe expansion card riser 2 (slot 1 and slot 2) | N/A | Enables connectivity to the PCI Express expansion cards. For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. |
2 | BOSS S2 module | N/A | This slot supports the BOSS S2 module. |
3 | PCIe expansion card riser 2 (slot 3 and slot 6) | N/A | Enables connectivity to the PCI Express expansion cards. For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. |
4 | PCIe expansion card riser 2 (slot 4 and slot 5) | N/A | Enables connectivity to the PCI Express expansion cards. For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. |
5 | USB 2.0 port (1) | This port is USB 2.0-compliant. | |
6 | PCIe expansion card riser 4 (slot 7 and slot 8) | N/A | Enables connectivity to the PCI Express expansion cards. For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. |
7 | Power supply unit (PSU 2) | For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. | |
8 | VGA port | For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. | |
9 | USB 3.0 port (1) | This port is USB 3.0-compliant. | |
10 | iDRAC dedicated port | Enables remote access iDRAC. For more information, see the iDRAC User's Guide. | |
11 | System identification button | Press System ID to locate a particular system within a rack or power the system ID on or off: To reset iDRAC, press and hold the button for 16 seconds or more.
| |
12 | OCP NIC port | N/A | This port supports OCP 3.0. The NIC ports are integrated on the OCP card which is connected to the system board. |
13 | NIC port (1,2) | The NIC ports are embedded on the LOM card that is connected to the system board. | |
14 | Power supply unit (PSU 1) | For more information about the PSU configurations, see the on product documentation page. |
For more information about supported drives, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications.
The following figure shows the rear view of the VxRail V670F with double width expansion card riser:
The following table provides the ports, panels, or slots for the rear view of the VxRail V670F:
Item | Ports, panels, or slots | Icon | Description |
---|---|---|---|
1 | PCIe expansion card riser 2 (slot 2) | N/A | Enables connectivity to the PCI Express expansion cards. For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. |
2 | BOSS S2 module | N/A | Supports the BOSS S2 module. |
3 | PCIe expansion card riser 2 (slot 3 and slot 6) | N/A | Enables connectivity to the PCI Express expansion cards. For more information about the expansion cards supported on your system, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. |
4 | PCIe expansion card riser 2 (slot 4 and slot 5) | N/A | Enables connectivity to the PCI Express expansion cards. For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. |
5 | USB 2.0 port (1) | This port is USB 2.0-compliant. | |
6 | PCIe expansion card riser 4 (slot 7) | N/A | Enables connectivity to the PCI Express expansion cards. For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. |
7 | Power supply unit (PSU 2) | For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. | |
8 | VGA port | For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. | |
9 | USB 3.0 port (1) | This port is USB 3.0-compliant. | |
10 | iDRAC dedicated port | Enables remote access iDRAC. For more information, see the iDRAC User's Guide. | |
11 | System identification button | Press System ID to locate a particular system within a rack or power the system ID on or off: To reset iDRAC, press and hold the button for 16 seconds or more.
| |
12 | OCP NIC port | N/A | This port supports OCP 3.0. The NIC ports are integrated on the OCP card which is connected to the system board. |
13 | NIC port (1,2) | The NIC ports are embedded on the LOM card that is connected to the system board. | |
14 | Power supply unit (PSU 1) | For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications. |
For more information about supported drives, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications.