Dell VxRail P670F, P670N, V670F, and S670 Installation and Service Manual

PDF

Front view of the system

The following figure shows the front view of the VxRail P670F, P670N, and V670F 24 x 2.5-inch drive system:

The following figure shows the front view of the VxRail S670 12 x 3.5-inch drive system:

Table 1. Ports, panels, and slotsPorts, panels, and slots
Item	Ports, panels, and slots	Icon	Description
1	Left control panel	N/A	Contains the system health, system ID, status LED, and the iDRAC Quick Sync 2 (wireless) indicator. iDRAC Quick Sync 2 is an optional offering for VxRail P670F, P670N, V670F, and S670. Status LED: Identifies failed hardware components. There are up to five status LEDs and an overall system health LED (Chassis health and system ID) bar. For more information, see the Status LED indicators section. Quick Sync 2 (wireless) (optional): Indicates a Quick Sync enabled system and allows management using mobile devices with the OpenManage Mobile (OMM) feature. Using iDRAC Quick Sync 2 with OMM aggregates hardware or firmware inventory, system level diagnostics and error information. For more information, see Integrated Dell Remote Access Controller User's Guide.
2	Drive	N/A	Install supported drives on your system.
3	Right control panel	N/A	Contains the power button, USB port, iDRAC Direct micro port, and the iDRAC Direct status LED.
4	Information tag	N/A	The Information tag is a slide-out label panel that contains system information such as Service Tag and PSNT. If you opted for the secure default access to iDRAC, the Information tag contains the iDRAC secure default password.

For more information, see the Dell VxRail P670F, P670N, V670F, and S670 Technical Specifications.