Dell PowerFlex Appliance and PowerFlex Rack PowerFlex Manager 3.x Compatibility Matrix

PowerFlex R650/R750 (hyperconverged, storage-only, and compute-only)

PowerFlex R6525 (compute-only)

PowerFlex R7525 (compute-only)

PowerFlex R640/R740xd (hyperconverged, storage-only, and compute-only)

PowerFlex R840 (hyperconverged and compute-only)

VMware ESXi 7.0U3n (management and compute-only)

Red Hat Enterprise Linux 7.6/7.7/7.9 (compute-only)**

Red Hat Enterprise Linux 7.5/7.6/7.7/7.9 (storage-only)**

CentOS 7.6/7.7/7.9 (compute-only)**

Embedded operating system (storage-only)

**PowerFlex Manager support for PowerFlex appliance with these operating systems is limited to installation only and no update.

Mellanox ConnectX-5 OCP/PCIe

Mellanox ConnectX-6 Dx

Intel X710/I350 rNDC

Mellanox ConnectX-4 rNDC

Mellanox ConnectX-4/ConnectX-5

Broadcom 57414 V1 2x25 OCP

Broadcom 57414 V2 2x25

Broadcom 57414 V1 2x25

Deployment requires a pair of the following switches:

• Cisco Nexus 93180YC-FX (access or management-aggregation)
• Cisco Nexus 93180YC-FX3(access or management-aggregation)
• Cisco Nexus 93240YC-FX2 (access or leaf)
• Cisco Nexus 92348GC-X (management)
• Cisco Nexus 9336C-FX2 (aggregation or spine)
• Cisco Nexus 9364C-GX2 (spine or leaf)
• Dell PowerSwitch S4148F-ON (access)
• Dell PowerSwitch S5224F-ON (access)
• Dell PowerSwitch S5248F-ON (access)
• Dell PowerSwitch S5296F-ON (access)
• Dell PowerSwitch 4148T (management)
• Dell PowerSwitch S5232F-ON (Aggregation)

**Clusters of 10 or fewer nodes.

PowerFlex 3.6.2 (storage-only)

CloudLink 7.1.8

Intelligent Catalog 38.365.00