Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerFlex Appliance and PowerFlex Rack PowerFlex Manager 3.x Compatibility Matrix

PDF

PowerFlex Manager 3.8.3

This section provides the PowerFlex Manager 3.8.3 compatibility details for PowerFlex rack components.

Component Managed mode Lifecycle mode Alerting mode
Nodes PowerFlex R650/R750 (hyperconverged, storage-only, and compute-only)

PowerFlex R6525 (compute-only)

PowerFlex R7525 (compute-only)

PowerFlex R640/R740xd (hyperconverged, storage-only, and compute-only)

PowerFlex R840 (hyperconverged and compute-only)

PowerFlex R650/R750 (hyperconverged, storage-only, and compute-only)

PowerFlex R6525 (compute-only)

PowerFlex R7525 (compute-only)

PowerFlex R640/R740xd (hyperconverged, storage-only, and compute-only)

PowerFlex R840 (hyperconverged and compute-only)

PowerFlex R650/R750 (hyperconverged, storage-only, and compute-only)

PowerFlex R6525 (compute-only)

PowerFlex R7525 (compute-only)

PowerFlex R640/R740xd (hyperconverged, storage-only, and compute-only)

PowerFlex R840 (hyperconverged and compute-only)

Operating system/hypervisor

VMware ESXi 6.7P08/7.0U3g (management and compute-only)

Red Hat Enterprise Linux 7.6/7.7/7.9 (compute-only)*

Red Hat Enterprise Linux 7.5/7.6/7.7/7.9 (storage-only)*

CentOS 7.6/7.7/7.9 (compute-only)**

Embedded operating system (storage-only)

**PowerFlex Manager support for PowerFlex rack with these operating systems is limited to installation only and no update.

VMware ESXi 6.7P08/7.0U3g (management and compute-only)

Red Hat Enterprise Linux 7.5/7.6/7.7/7.9 (storage-only)**

Embedded operating system (storage-only)

PowerFlex rack only supports these operating systems. An update to these operating systems is not supported.

Not applicable
Adapters

Mellanox ConnectX-5 OCP/PCIe

Mellanox ConnectX-6 Dx

Intel X710/I350 rNDC

Mellanox ConnectX-4 rNDC

Mellanox ConnectX-4/ConnectX-5

Broadcom 57414 V1 2x25 OCP

Broadcom 57414 V2 2x25

Broadcom 57414 V1 2x25

Lifecycle mode when a supported adapter cannot be identified. Not applicable
Networking Managed mode requires a pair of the following server facing Dell and Cisco switches:
The following switches are shipped and supported:
  • Cisco Nexus 92348GC-X
  • Cisco Nexus 93180YC-FX
  • Cisco Nexus 9336C-FX2
  • Cisco Nexus 93240YC-FX2
  • Cisco Nexus 9364C-GX
  • Dell S5232F-ON
  • Dell S4148F-ON
  • Dell S5248F-ON
The following switches are supported but no longer shipped:
  • Cisco Nexus 31108TC-V
  • Cisco Nexus 3172TQ
  • Cisco Nexus 93180YC-EX
  • Cisco Nexus 9236C
  • Cisco Nexus 3132
  • Cisco Nexus 3164
  • Cisco Nexus 9364C

PowerFlex Manager can monitor and update the accessible switches in managed mode.

Lifecycle mode when a supported switch cannot be identified or cannot be granted with write access, provided the network configuration does not modify the node configuration.

PowerFlex Manager can only update components with write access.

Not applicable
Storage

PowerFlex 3.6.0.7 (storage-only)

PowerFlex 3.6.0.7 (storage-only)

Not applicable
Security

CloudLink 7.1.5

CloudLink 7.1.5

Not applicable
Compliance

RCM 3.5.7.1 / 3.6.3.1

RCM 3.5.7.1 / 3.6.3.1

Not applicable

+ Applicable only to the final digit in the version. See RCM Portal for more information.


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\