This section provides the PowerFlex Manager 3.8.3 compatibility details for PowerFlex appliance components.
Component | Compatibility |
---|---|
Nodes |
PowerFlex R650/R750 (hyperconverged, storage-only, and compute-only) PowerFlex R6525 (compute-only) PowerFlex R7525 (compute-only) PowerFlex R640/R740xd (hyperconverged, storage-only, and compute-only) PowerFlex R840 (hyperconverged and compute-only) |
Operating system/hypervisor |
VMware ESXi 6.7P08/7.0U3g (management and compute-only) Red Hat Enterprise Linux 7.6/7.7/7.9 (compute-only)** Red Hat Enterprise Linux 7.5/7.6/7.7/7.9 (storage-only)** CentOS 7.6/7.7/7.9 (compute-only)** Embedded operating system (storage-only) **PowerFlex Manager support for PowerFlex appliance with these operating systems is limited to installation only and no update. |
Adapters |
Mellanox ConnectX-5 OCP/PCIe Mellanox ConnectX-6 Dx Intel X710/I350 rNDC Mellanox ConnectX-4 rNDC Mellanox ConnectX-4/ConnectX-5 Broadcom 57414 V1 2x25 OCP Broadcom 57414 V2 2x25 Broadcom 57414 V1 2x25 |
Networking |
Deployment requires a pair of the following switches:
After deploying,
PowerFlex Manager can monitor and update the following access Dell switches:
**Clusters of 10 or fewer nodes. |
Storage |
PowerFlex 3.6.0.7 (storage-only) |
Security |
CloudLink 7.1.5 |
Compliance |
Intelligent Catalog 38.357.01 / 38.363.01 |