Dell PowerFlex Appliance with PowerFlex 4.x Administration Guide

PDF

Install and configure WinSCP

Use this procedure to install and configure WinSCP.

Prerequisites

Using a web browser of the machine you intend to connect to the jump server with, go to WinSCP downloads and click Portable Executables. This allows you to use the software without installing it. This option provides a ZIP file with a WinSCP EXE executable.

Steps

Using WinSCP.exe, log in to configure WinSCP.

Enter the following values:

Table 1. WinSCP fields to confgureEnter the following values for the WinSCP fields to configure.
Field	Do the following
File Protocol	Select SCP
Host name	Enter your hostname for the jump server.
Port	Enter `22`.
User name	Enter `admin`. If you have configured another user on the jump server for this purpose, enter the username.
Password	Enter the password.

Optionally, you can save the configuration for ease of usage the next time WinSCP is used.
Click Connect.
When you connect to the jump server for the first time, you must validate the credentials of the jump server. After you confirm the host, click Yes.
Enter the password when prompted.
After connecting to the jump server, the file structure of the local Windows host appears in the left pane of the window and jump server file structure appears in the right pane.