Dell PowerFlex Appliance with PowerFlex 4.x Administration Guide

Add SDRs to PowerFlex Manager

1. From PowerFlex Manager, click Protection > SDRs.
2. Click + Add SDR and enter the following information:
   1. Enter the SDR name.
   2. Update the SDR Port, if required (default is 11088).
   3. Select the relevant Protected Domain.
   4. Enter the SDS IP addresses, one at a time. Click Add IP for each.
3. Click Add.
4. Verify the node shows as Connected in the Connection State column.
5. Repeat for each storage-only node.